5 photos



Linings, partition walls, internal or external insulation: four thicknesses to build in comfort, naturally.
60 × 30 cm format, straight edges. Thermal resistance is given as a dry value, then as a design value. Thermal lag is calculated using the standard formula.
Dry λ values and packaging taken from our MULTICHANVRE installation guide.




Tell us your application and surface area: we will recommend the right thickness and an estimated quantity, ready to turn into a quote.
Lining stone walls, external insulation, partition walls, floors, frame infill, then lime finishes: the hemp block at every stage.
Four thicknesses in a 60 × 30 cm format: 10 cm (R 1.5, thermal lag 6.1 h), 15 cm (R 2.3, 9.25 h), 20 cm (R 3.0, 12.3 h) and 30 cm (R 4.6, 18.5 h). These R-values are dry values in m².K/W; the design values are 1.4, 2.1, 2.8 and 4.2.
120 blocks (21.6 m²) in 10 cm, 80 blocks (14.4 m²) in 15 cm, 60 blocks (10.8 m²) in 20 cm and 56 blocks (10.08 m²) in 30 cm.
In three stages: the blocks are laid with a lime-based mortar applied with a notched trowel, with staggered joints; they are tied to the backing wall with connecting brackets, strips of steel strapping or fixing rosettes (2 to 5 per m²); then the wall is rendered or plastered. Our installation guide walks you through every step on the professionals page.
Indoors: spray plaster, lime, clay or plasterboard. Outdoors: a lime render with full mesh reinforcement.
MULTICHANVRE is currently going through certification: an ATEx (France’s experimental technical assessment) covering internal wall insulation is being reviewed by the CSTB (French building science centre), with Vieille Matériaux as the applicant.
The block is not rot-proof: store pallets under cover, in a dry place, and never stack them.